Commercial Land Clearing in Charlotte, NC

Who We Clear For

Most of our commercial work comes from developers, general contractors, and site contractors who need a dependable clearing sub. Projects range from small retail and office outparcels to townhome and subdivision phases, church and school expansions, and industrial lots along corridors like I-485, I-85, and the airport area. Whether you're the developer holding the permits or the site contractor who needs clearing done before your graders mobilize, we fit into your structure and report to whoever runs the site.

Working to the Approved Plans

Commercial clearing is defined by the plan set, not by what looks right in the field. Before we start, we walk the site with the clearing limits and the limits of disturbance in hand, confirm the stakes or flagging match the drawings, and raise any discrepancies with your engineer or superintendent. If a limit line is unclear in the field, we stop and ask rather than guess. Clearing past an approved boundary is one of the fastest ways to draw a stop-work order, and we won't put your project in that position.

Tree-Save Areas and Charlotte's Tree Ordinance

Charlotte's tree ordinance applies mainly to commercial and new development, which means many commercial sites have tree-save areas, required buffers, or specimen trees shown on the approved plans. We treat those areas as no-go zones. Protective fencing should be up before clearing starts, and our machines stay outside it, including when we're staging material or turning around. Requirements vary by project, so confirm the specifics for your site with the city and your design team.

Erosion Control Comes First

North Carolina requires an approved erosion and sedimentation control plan for most land disturbance over one acre, and nearly every commercial site crosses that line. Perimeter measures like silt fence and construction entrances typically go in before or alongside clearing, depending on the plan sequence. We coordinate with your erosion control contractor so the order of work matches the approved plan, and we keep our equipment and traffic inside the controls. Creek buffers under Mecklenburg County's S.W.I.M. rules also need to be respected, so confirm any buffer limits with the county.

Coordinating With Your Grading Sub

We don't grade. On a commercial site that's a feature, not a gap: we clear, and your grading contractor shapes the site. We'll talk directly with your grading sub about stump removal, whether they want the topsoil left undisturbed, where they want material staged, and the date they plan to mobilize. That conversation up front prevents the classic problem of a grader showing up to a site that's cleared but not cleared the way they needed it.

Debris, Mulch, and Haul-Off

Cleared material on a commercial site can be mulched in place, stockpiled, or hauled, depending on the plans and what your grading sub needs. Mulch is useful for erosion control in some areas and a problem in structural fill zones, so we sort that out before we start. Open burning is heavily restricted in Mecklenburg County, so burn piles aren't part of our approach on any job.